This applicative program allow the user to manage the battery pack profiles stored into the Advanced Charger. The program works when connected via a standard 3-wires serial cable to the charger, and when the charger itself is in "PC Management" -> "EEprom update". When the program is started check immediately for the charger connection: in case of no communication display a generic "LINK ERROR" message on the last line: to solve this problem check carefully the cabling and select the right communication port on the selection box located just below the "SAVE" button. If the communication has been established the first profile stored is presented on the user area.

The profiles selection area (the 7 large buttons) allows the user to display and check individually all the profiles stored on the charger. When the user display a particular profile can edit directly the values (check carefully for the data format), update the charger internal profiles (via "ADV Update" button), save on the hard disk the profile ("SAVE" button), recall an previously stored profile ("LOAD" button).

The user can also select the HV (1-19 cells) or the standard (named LV on the program) (1-9 cells) Advanced Charger configuration via dedicated selection box, just below the "LOAD" button.